TF1e

TF1e_photo

Overview

The TF1e is the perfect machine for customers that require larger blister cards but still need the ability to change quickly between products or batches. Building on the success of the TF1, the TF1e is a larger format version of the TF1. The wider format range allows single blisters as large as 90mm x 165mm to be produced in one forming cycle. Further, the machine has a material shredder and a vacuum reject system for securely transferring good blisters while positively rejecting faulted blisters.

Take a moment to review the tooling, standard features and options available for the TF1e.

Tooling

  • Tool-less change-over
  • Tooling is completely tested at Pharmaworks prior to shipping (Pharmaworks is committed to keeping a running TF1e in-house for tool testing)
  • A setup and testing sheet is provided with each tool set, reflecting factory recommended parameters.  This is essential to quick and efficient start-up of new tooling.

Standard Features

  • Servo driven stations (NO LINE SHAFT)
  • Servo indexing (with integrated print registration)
  • Ability to adjust station stroke and pressure while running machine (Dynamic seal pressure adjustment)
  • Contact heating
  • Modular feed area
  • Auto-lift seal station
  • Single blister reject (Assumes single blister format)
  • Material shredder

Options

  • Selective forming (ability to control individual cavities forming)
  • Slitter
  • Vision (scanware spectra-lite color system for product inspection). B&W systems available as well
  • Vision (scanware pri-con print verification system)
  • Feeders (manual feed trays, flood feeders, dedicated feeders)
  • Base and Lidding low roll level detection
  • Servo plug assist / cold forming
  • Various printer systems can be easily integrated to the TF1e

 

 

Specifications
Max. Format Range 90mm x 165mm
Max. Forming Depth 25mm
Max. Base Material Roll Size 500mm
Max Lid Roll Size 300mm

 

Dimensions
Length 3946 mm (includes 1365mm feed area)
Width 1209mm with cabinet open
Height 1815 (top of HMI)

 

Utilities
Voltage 220-240 VAC, Three Phase
Amperage 25-35 Amps (dependent on subsystems)
Compressed Air 100 PSI @ 10 CFM

 

 

TF1e Blister Machine with Dedicated Feeder

 

Be Sure to Check out the PharmaWorks Channel on YouTube.com

Live Chat